Thanks for all of the info on your 2008 Keystone Sprinter 272 RLS based on that the Dexter E-Z Flex Suspension Kit # K71-652-00 would fit and work great. view full answer...
I was able to confirm that your Sprinter has a bolt pattern of 6 on 5 1/2". The drums you mentioned, # 8-201-5UC3, have the correct bolt pattern, but are only rated to work with 5200 lb axles. Based on the specs of your 2013 Keystone Sprinter, your GVWR is 10,995 lbs. So, I would guess that your axles are rated at 6000 lb. each, not 5200 lb. each.
To be safe, I would recommend # AKHD-655-6-K, which uses the same bearings and has the same bolt pattern, but is rated for 5200 lb and 6000... view full answer...
The Gooseneck to 5th Wheel Trailer Coupler Adapter # KPG5-Q25-IP is a 4" x 4" tube, so as long as your outer tube is designed to fit that width you can use this as your gooseneck to 5th wheel.
If you measure the inside diameter of your outer tube and find you've got something different just let me know and I can let you know what options we have for you that will work. view full answer...
We do indeed have the correct bearing kit for your 2018 Keystone Sprinter Campfire 29BH, which does have 5,200 lb Dexter axles. The correct kit, which includes the bearings, races, and grease seal, is the following:
- Bearing Kit # BK3-110
The # BK3-110 is a kit for one hub, so you would need one kit per hub. view full answer...
Yes the Dexter Electric Trailer Brake Kit part # K23-462-463-00 is a left and right hand brake assembly that fits your 4,400 lb trailer axle. This would be the exact kit you'd want for your 2009 Keystone Sprinter travel trailer. view full answer...
We do have a pretty easy way for you to mount a spare tire carrier on your trailer with a 4 inch square bumper, and what you can do is add the following:
- etrailer RV Bumper 2" Trailer Hitch Receiver # e38HR
- etrailer Hitch Mounted Spare Tire Carrier # e98ZR
The spare tire carrier will mount directly in the hitch so this is going to be pretty simple, and something you can set up quickly. view full answer...
We do have a good replacement that will be about the same size as your Jensen MP5000 but there are no plug and play replacement options. That being said, the Jensen # JWM60A radio is going to be the best replacement you can find for your current radio. Just match up the functions of the wires using these heat shrink connectors # DW05743-10 if your current plug will not hook into the # JWM60A radio. view full answer...